As you had to know how to fix a sliding glass door as a general rule, the rollers on a sliding glass door will last anywhere from ten to fifteen years, yet they do eventually wear out. If you are the kind of person who does not mind getting your hands dirty, then you can change the rollers on it without spending a fortune on paying someone else to do it! All you will need is a little bit of information and advice, plus a lot of muscle to get the door out!
The first thing to know on how to fix a sliding glass door is that the majority of all sliding glass patio doors are made out of aluminum, although there are a handful of them, which are made from wood and vinyl as well. In spite of the material, they universally use ball bearing rollers, making it slide easily opened and shut, in both directions. Doors that are made out of aluminum and some vinyl doors as well have 2 screws on either side to hold it in place near the bottom of the door. Just below the two screws to raise and lower the roller you will find that there is an open hole for the purpose of adjusting the screw. Quite often, you will find that a wooden door will have 2 of these rollers instead of one, because they have a lot more weight, and they need it in order to support the extra mass. The screws are accessible for the purpose of making necessary adjustments, through plastic caps covering holes in the front of the bottom of the door.
Before you decide to pull the door out and replace the rollers, be certain to closely inspect the screws and adjust accordingly on how to fix a sliding glass door. Use a large flat bladed screwdriver under the door on each side in order to alleviate the weight of the door from the roller and then proceed by turning the adjustable screw with the appropriate type of screwdriver. This could possibly solve the problem! If this simple step accomplishes the task of allowing the door to slide easily back and forth, then your mission is accomplished!
Post a Comment